Home / Blog

Product & Promotional Updates ARMORCOAT

America's # 1 Choice in Epoxy Floor Coating Since 1988

Custom Solutions
June 6th, 2015 10:24 am

Armorcoat can Customize a Solution For You

Armorcoat Floor Coating

Superior Floor Coating Systems
Over 74 Different Types of Hardeners, Epoxies & Urethanes

Armorplate Lifetime Warranty Hardener/Densifer/Sealer: Penetrates, closes the pores and seals concrete surfaces. Strengthens concrete by up to 50% over fully cured, unprotected concrete. Lifetime Warranty against dusting. Armorplate also eliminates shrinkage and cracking.

Armorcoat DFS Decorative Flake System: Proprietary deep penetrating epoxy base coat, broadcast application of decorative color flakes, followed by a clear, chemical resistant urethane topcoat.

Armorcoat DQS Decorative Quartz System: 100% solids epoxy base coat, the addition of Armorquartz colored granules, chemical resistant epoxy seal cost, clear chemical resistant urethane topcoat.

Armorcoat HP High Performance System: Proprietary deep penetrating epoxy base coat, followed by an application of Armorcoat's HP clear or colored aliphatic uretha...

Armorcoat Product Description
June 4th, 2015 4:53 pm

High Build Epoxy Color Coat

Armorcoat Floor Coating

Product Description

  • AR1707LVP: is a two component 100% (+1-1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed.
  • Recommended For: A high build topcoat or basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.
  • Colors Available: White, off white, light gray, medium gray, dark gray, tile red, brown, tan, beige, light blue, blue, green and special colors are available upon request.
  • Recommended Film Thickness: 12-30mils.
  • Coverage Per Gallon: 53-130 square feet per gallon @ 12-30 mils
  • Packaging: 3 gallon kit (2.9 :3.0 gallons net approximately.
    15 gallon kits (14-15 gallons net approximately)
  • Shelf Life: On...
Armorcoat Concrete Repair
June 3rd, 2015 2:41 pm
Armorcoat Floor Coating

Concrete Repair Floor Coatings Systems
Enhance Your Floors

If your facility's floors are experiencing damage such as cracks, chipping, or crumbling, Armorcoat has the perfect solution for you. We have resurfacing mortars that can prevent further damage from occurring. Many times, concrete slabs can begin to crack along the joint lines or suffer stress from the traffic of heavy vehicles or even chemical damage. The result of these conditions is usually unsightly and unsafe areas that spread throughout the floor. You can save a lot of money by not replacing the concrete if you can stop the potential damage from spreading or becoming worse.

There are color options for our concrete patching solutions that can fit any job. Check out our color selector here to view top coat colors or a decorative flake broadcast. With our durable epoxy mortars, our expertly trained and educated staff can give you the best insight a...

AR928 - Flexible Joint Sealant
June 2nd, 2015 11:34 am

Epoxy Flexible Joint Sealant

Armorcoat Floor Coating

Product Description

AR928: Flexible joint sealant is a two component 100% solids epoxy designed for applications where a resilient flexible joint material is needed. This material is also available in a more viscous formulation (928M-2) for applications to vertical surfaces. The two component material (standard) is supplied with a black component and a white component so proper mixing can be easily observed.

  • Recommended For: Expansion joints in general industry as well as expansion joints of highways, bridges, airports, garages and marine decks.
  • Not Recommended For: Applications for all acids and chemicals.
  • Colors Available: Medium Gray (mixed) Part A white and Part B black.
  • Coverage Per Gallon: 2 gallon fit @ 1/2" by 1.0" yields 74-78 l...
"How To" DIY Kits
June 1st, 2015 1:33 pm

Step by Step How to DIY

Armorcoat Floor Coating

Do-it-Yourself Concrete Floor Coatings Kits
Application Instructions

  1. Your first step is to sweep and dust any debris on the floor area you'll be coating. A dry, dust free area is essential to a proper coating. It's also important that the area you're coating is free from serious cracks and damage.
  2. Use a broom and wet-dry vacuum to thoroughly clean debris from the floor. Remove grease with a degreaser and stiff brush. Rinse the degreaser and allow the floor to dry. You may also use a neutral cleaning agent to break up the heavily soiled areas instead of a degreaser. Heavy stains may require a pressure washer.
  3. For the acid wash, mix one part of muriatic acid with six parts of water. Carefully pour the acid into the water, to minimize splashing. Wear eye protection and gloves when working with these liquids. After using muriatic acid, mi...

Armorcoat Epoxy Concrete Coatings

Specializing in Residential, Commercial, and Industrial Epoxy Concrete Coatings!
America’s #1 Choice for Epoxy Floor Coatings Since 1988.

Contact Us