Home / Blog

Product & Promotional Updates ARMORCOAT

America's # 1 Choice in Epoxy Floor Coating Since 1988

Armorcoat AR820 Epoxy Coating
May 24th, 2015 12:13 pm     A+ | a-

Epoxy (Oil Stop) Coating

Armorcoat Floor Coating

Product Description

AR820 is a two component solvent based epoxy coating that exhibits excellent characteristics for coating over petroleum based oil contaminated concrete. This product allows excellent substrate penetration which results in excellent adhesion and is an ideal primer for oil contaminated concrete substrate.

Recommended For: Petroleum oil contaminated substrates. However, this product is not intended for use over vegetable oil, animal fat or synthetic oil contaminated concrete. This product can withstand exposure to many common solvents and chemicals.
Colors Available: Black Only
Recommended Film Thickness: 5-8 Mils per coat (wet thickness) 3-5 mils dry
Coverage Per Gallon: 200-300 Square Feet @ 5-8 mil wet thickness
Self Life: 1 year
Finish Characteristics: Satin Gloss (40-60 at 60 degrees @ Erichsen Gloss meter)
Impact Resistance: Gardner Impact, Direct = 50 in.lb
Cure Schedule:
Pot Life (2 gallon volume) ... 1-3 hours @ 70 degrees F
Tack Free (dry to touch) ... 5-10 hours @ 70 degrees F
Recoat or Topcoat ... Immediately after Application
Light Foot Traffic ... 10-24 hours @ 70 degrees F
Full Cure (heavy traffic) ... 2-7 days @ 70 degrees F
Primer: None Required
Topcoat: Non Requires. Many epoxies and urethanes are compatible.

Contact Us today for a Free Quote!

America's # 1 Choice in Epoxy Floor Coating Since 1988 - Call (888) 592-7667

Older Post Home Newer Post

Armorcoat Epoxy Concrete Coatings

Specializing in Residential, Commercial, and Industrial Epoxy Concrete Coatings!
America’s #1 Choice for Epoxy Floor Coatings Since 1988.

Contact Us